• Phone Number

  • + 91-9324066282

line

RAW MATERIAL FOR POLYMER STAMP

LIQUID PHOTOPOLYMER RESIN

image

LIQUID POLYMER RESIN FOR RUBBER STAMPS

Flora BL-50

FLORA BL-50 Is UV Curable Resins Of 45/50 Durometers (Shore A). Resin Is Specifically Design For Making Hand Stamp (Polymer Rubber Stamp). Under Controlled UV Light Radiations, Liquid Polymers Convert Into Flexible And Dimentionally Stable Plates. The Compatibility Of The Plates Is Excellent With Water And Oil Based Ink.

  • Excellent Print Quality.
  • Environmentally Friendly.
  • Excellent Compatibility with Water and Oil Inks.
  • Low Tack Resin.
  • Wide Exposure Latitude.
  • Good Dimensional Stability.
  • Long Self Life, No or Very Neglibale Deterioration on Long Storage .
Physical Properties
  Durometer 45/50
  Moisture resistance Good
  Abrasion resistance Excellent
  Oxidation resistance Excellent
  Ozone resistance Excellent
  Specific gravity 1.025
  • KIVI Photopolymer are colorless liquid PHOTOSENSITIVE POLYURETANE ELASTOMER. This liquid polymerizes when exposed to an Ultra violet light source having spectrum range between 310 and 380 nanometer.
  • Good dimensional stability.
  • Excellent printing quality.
  • Tack free plates.
  • Oustanding resistance to yellowing and UV Stability
  • Long life if not exposed to direct sun light.
  • Store liquid resin at temperature between 2° and 28° C in closed container.
  • When producing stamp, always wear protective clothing, gloves safety glasses.
  • KIVI resin must be used with compatible substrate sheet and accessories.
  • Long life if not exposed to direct sun light.
  • Fresh polymer and recovered polymer should use carefully.
  • Do not expose the liquid photopolymer to the direct sunlight under any circumstances.
  • Never mix two different resin from different source.
  • Always keep away from children.
  • Various SIZE of Mount Available As Per General Requirement Of The Market.

USES

  • For Making Hand Stamp(Rubber Stamp).
  • For Making Printing Plates for Labels, Envelope Etc.

Safety Information And Labeling

  • Both polymer have an LD50 exceeding 5000mg/kg of body weight. This means that they are non dangerous.
  • The labeling according to 93/72/CE and94/69/CE laws resumed in the following table.
  • Non Flammable
  • Non Corrosive
  • Non Volatile
  • Non Oxidizing
  • Non Toxic
  • Odourless
  • Non Explosive
  • Non Harmful

Custom Teriff Heading

  • Custom Teriff Heading Number : 37079090

MSDS

  • Phone Number

  • + 91-9324066282

line
  • Kivi Markings

  • 515, Manish Chamber, Sonawala Road, Goregaon (East), Mumbai - 400 063 India.

line